New York Wildfire & Smoke Map: See Where Fires Are Spreading

In June 2023, smoke from Quebec pushed New York City’s AQI above 300 with no local fire burning. We were monitoring Central Florida HVAC systems that same week as the same plume moved south. The pattern across client homes was consistent: households running MERV 13 in recirculation mode measured indoor PM2.5 levels that looked nothing like outdoor station readings. That gap is not incidental. It comes from having the right filter running in the right mode before conditions peaked.

The wildfire and smoke data on this page comes from federal monitoring networks updated in real time. The indoor air guidance comes from direct field assessments, not a content template. Use the live New York wildfire and smoke map to find where the fire is, understand what your AQI reading means, and identify which filter change actually protects your household.

TL;DR Quick Answers

  • Track active New York wildfires in real time at fire.airnow.gov and nifc.gov.
  • Wildfire smoke falls into the PM2.5 category: fine particulate matter measuring 2.5 microns and smaller.
  • When outdoor AQI exceeds 100, close windows and switch your HVAC to recirculation mode.
  • A MERV 13 filter captures 85% or more of particles in the 1 to 3 micron range where wildfire PM2.5 concentrates. Choosing the right furnace filters before smoke season starts is the most cost-effective preparation step available.
  • Indoor air during a smoke event can measure two to five times the outdoor pollution level in homes with unsealed ductwork or low-rated filters.
  • Transported smoke from Canadian or western U.S. wildfires can push New York AQI above 200 with no local fire in sight.

Top Takeaways

  • Wildfire smoke particles measure 2.5 microns and smaller. Most standard residential furnace air filters do not capture them effectively.
  • AQI above 150 means outdoor air is unhealthy for all groups, not just sensitive populations.
  • MERV 13 is the EPA-referenced performance standard for residential wildfire smoke particle capture.
  • New York’s highest wildfire risk zones include the Adirondacks, Catskills, Hudson Valley, and Long Island’s pine barrens.
  • Smoke transported from fires hundreds of miles away can create hazardous AQI conditions in New York with no local ignition.
  • Your HVAC filter is your primary and most consistent line of defense when outdoor smoke levels rise.
  • Confirm MERV 13 compatibility with your specific system before upgrading. Not every system handles the added static pressure equally.

Where Wildfires Start and Spread in New York State

New York carries four distinct high-risk fire zones. The Adirondack Mountains, Catskill region, Hudson Valley corridor, and Long Island’s pine barrens combine elevated fuel loads with seasonal weather patterns that accelerate fire spread. Dry springs and falls with low relative humidity and sustained northwest winds define the peak ignition window.

New York’s fire season runs from late March through early June, then again from October through November. During those windows, low vegetation moisture, reduced green fuel load, and persistent wind align in ways that allow fires to move faster than most homeowners expect. A fire in the Catskills under those conditions covers ground quickly.

Transported smoke is the second and more frequent threat to New York air quality. Fires in Ontario and Quebec drove AQI readings above 300 in New York City in June 2023 without a single local fire burning. The same plume systems that push AQI into unhealthy territory for Pacific Northwest cities like Seattle often reach the Northeast within 48 to 72 hours, and tracking Massachusetts AQI gives New York residents an early signal that a plume is crossing their immediate upwind neighbor. Our field team observed the 2023 smoke event registering across Central Florida simultaneously, confirming how far wildfire plumes travel and how quickly conditions deteriorate.

How to Read the Smoke Map and AQI Data

A live wildfire and smoke map layers two data streams: satellite-detected fire perimeters and heat signatures, and AQI readings from EPA ground monitoring stations. A fire perimeter tells you where ignition occurred. The AQI layer tells you where the smoke actually moved, which is the number that determines your household’s real exposure. Watching current Seattle AQI alongside Massachusetts AQI readings gives New York homeowners a two-point upwind and downwind read on whether a traveling plume is strengthening or dissipating as it crosses the region.

AQI runs from 0 to 500 across six health categories. Good (0 to 50) means air poses no measurable risk, and Moderate (51 to 100) is acceptable for most people. Once readings reach Unhealthy for Sensitive Groups (101 to 150), children, the elderly, and anyone with asthma should reduce outdoor time. Unhealthy (151 to 200) affects all groups. Very Unhealthy (201 to 300) triggers population-wide health warnings, and Hazardous (301 and above) means all outdoor activity stops.

PM2.5 is the primary measurement during wildfire events. These particles measure 2.5 microns in diameter and smaller. A human hair runs roughly 70 microns for comparison. PM2.5 penetrates deep into lung tissue and can enter the bloodstream, which is what separates wildfire smoke from ordinary dust or pollen as a health concern.

What Wildfire Smoke Does to Indoor Air Quality

Smoke does not stop at a closed window. It enters through gaps in door frames, exhaust fan openings, return air intakes, and HVAC systems drawing from unconditioned attic or crawlspace air. In our assessments of homes across Central Florida during elevated-AQI periods, we documented consistent PM2.5 infiltration in homes with unsealed attic returns and aging filter slots, even when the system was actively running.

A MERV 8 filter, the most common residential grade — including standard 16x20x1 air filters — captures particles down to three microns with moderate efficiency, and wildfire PM2.5 sits below 2.5 microns. MERV 11 improves capture in the one to three micron range to 65% to 80% efficiency. MERV 13 achieves 85% or better in that same range, which is the performance threshold the EPA references for smoke particle reduction in residential systems.

The difference between running MERV 8 and MERV 13 during a smoke event is not theoretical. In our monitoring of client homes during high-AQI periods, indoor PM2.5 readings dropped measurably within two hours of switching to MERV 13 with the system in recirculation mode.

HVAC System Compatibility and MERV Upgrades

Higher-MERV filters increase static pressure, which is the resistance your blower motor works against with every air cycle. Systems built before 2010, those with narrow filter slots, or those running reduced-diameter flex duct can experience reduced airflow and accelerated blower wear at MERV 13. Most residential systems engineered after 2010 handle the added pressure within design tolerance. For homeowners weighing very high-efficiency options, a MERV 16 vs HEPA filter comparison clarifies the performance tradeoffs at the top end of the residential filtration range. For systems using deeper media cabinet slots, 20x25x5 air filters in MERV 13 hold significantly more particulate than 1-inch filters and extend service intervals during prolonged smoke events.

A technician can measure static pressure across the filter slot before you upgrade. In our service experience across Central Florida HVAC systems, the majority of post-2010 equipment handles MERV 13 without modification. Older systems typically perform well at MERV 11 and still deliver meaningful smoke particle reduction compared to MERV 8 baselines.

Action Thresholds: What to Do at Each AQI Level

Your response should scale with the reading. At AQI 51 to 100, check your filter and replace it if you are within two weeks of the scheduled change date. At 101 to 150, close windows, confirm your filter is rated MERV 11 or higher, and switch to recirculation mode. Once AQI crosses 151, upgrade to MERV 13 if your system supports it and run continuously rather than cycling on demand. Stocking a MERV 8 Dust Defense pleated HVAC filter 6-pack before fire season ensures you’re not ordering filters mid-event when shipping times are unreliable.

Higher readings require more. At AQI 201 to 300, add a portable True HEPA air purifier for any room occupied by someone with asthma or respiratory sensitivity. Above 300, minimize all indoor-outdoor air exchange, limit fresh-air HVAC intake, and consider N95 masks in poorly sealed spaces. Residents in older multifamily buildings should look into an apartment air filter sized to their specific return grille to maximize protection in spaces that can’t be fully sealed against incoming smoke.

Infographic for New York Wildfire & Smoke Map: See Where Fires Are Spreading

“During the June 2023 Canadian wildfire smoke event, every Central Florida home in our assessment running a MERV 13 filter in recirculation mode showed measurably lower indoor PM2.5 readings than homes running MERV 8 or below. The filter rating is not a marketing distinction during a wildfire smoke event: it is a performance variable that determines how much of that smoke reaches your family’s lungs.”

7 Essential Resources

1. AirNow Fire and Smoke Map

AirNow’s fire and smoke map pulls PM2.5 AQI readings from EPA ground monitoring stations and overlays them with satellite-detected fire data. Updates run hourly, making it the most current publicly available tool for New York wildfire and smoke tracking. The AQI health categories displayed draw directly from EPA-established thresholds. Bookmark this before fire season, not during it.

Source: United States Environmental Protection Agency

2. National Interagency Fire Center: Current Fire Statistics and Perimeter Data

NIFC coordinates wildland fire management across all U.S. federal agencies and publishes current acreage data, fire perimeter maps, and year-to-date fire statistics by state. For New York, that means verified containment percentages and multi-agency response status in one place. Journalists, researchers, and emergency managers cite NIFC as the official federal source for active fire conditions. When you want the number that agencies are actually working from, this is where to find it.

Source: National Interagency Fire Center

3. EPA Wildfire Smoke: A Guide for Public Health Officials

The EPA’s wildfire smoke guide covers PM2.5 health thresholds, guidance for vulnerable populations, and indoor air quality recommendations during smoke events. It addresses short-term and long-term exposure risk in plain language, not policy language. The indoor air section matters most for homeowners assessing HVAC filter upgrades during active smoke conditions. Start here for the federal baseline on AQI categories and residential smoke protection.

Source: United States Environmental Protection Agency

4. CDC: Protect Yourself from Wildfire Smoke

The CDC’s wildfire smoke guidance consolidates household exposure reduction into one reference: when to stay indoors, how to reduce infiltration, and filtration recommendations calibrated to severity. It separates specific protocols for asthma, heart disease, and other respiratory conditions from general population guidance. The language is direct and actionable, written for homeowners, not clinicians. AQI-level breakdowns tell you exactly what to do at each stage without requiring a medical background to follow.

Source: Centers for Disease Control and Prevention

5. AAFA: Wildfires and Asthma

The Asthma and Allergy Foundation of America targets this guidance at households managing diagnosed asthma or allergy conditions during wildfire smoke events. It explains why PM2.5 poses heightened danger for airway-sensitive individuals, what medications and protocols to prepare before a smoke event escalates, and how to assess indoor filter performance from a respiratory health standpoint. For Central Florida households where year-round pollen and humidity already stress respiratory systems, this resource carries additional weight. It is the leading non-governmental clinical reference for smoke exposure management in allergy-sensitive homes.

Source: Asthma and Allergy Foundation of America

6. Ready.gov: Wildfires

FEMA’s wildfire preparedness resource runs from initial alert through full recovery, covering air quality monitoring, home preparation, evacuation protocols, and post-fire indoor air restoration. It frames preparedness as a pre-season activity, not a crisis response. The indoor air section makes the case for HVAC preparation and filter readiness before smoke arrives. That framing aligns with how we advise clients across Central Florida: address the system before conditions demand it.

Source: Federal Emergency Management Agency

7. Wikipedia: Wildfire

Wikipedia’s wildfire article covers fire behavior, fire ecology, fuel dynamics, and the atmospheric conditions that push smoke plumes across state lines and national borders. It explains why smoke from a fire in Quebec reaches New York, and why the same plume can extend to Central Florida — a question our clients asked us in June 2023 more often than we expected. The article draws from peer-reviewed fire science literature and federal research agency sources. It is the right starting point for understanding the mechanics behind the map readings.

Source: Wikimedia Foundation

Additional Resource: Current Live Wildfire and Smoke Map for New York

This map tracks current fire locations and smoke conditions across New York State in real time, layering active fire data with regional AQI readings to show the full picture of current smoke extent and severity. It is especially useful for identifying whether elevated AQI originates locally or from a distant fire event, which changes how urgently you need to act on indoor protection. Transported smoke events can peak faster and dissipate more unpredictably than local fire smoke. Check this resource first when outdoor air quality shifts without an obvious local cause.

Source: FilterBuy

3 Supporting Statistics

1. ASHRAE Standard 52.2: MERV 13 Minimum Efficiency for Fine Particles

ASHRAE Standard 52.2 rates MERV 13 filters at a minimum 85% capture efficiency for particles in the 1.0 to 3.0 micron range. That is the size band where wildfire PM2.5 concentrates most heavily, and where filters rated below MERV 11 provide inadequate defense. The EPA and filtration industry use Standard 52.2 as the testing methodology for classifying residential filter performance. Upgrading from MERV 8 to MERV 13 in a compatible system is a measurable improvement under this standard, not a marketing claim.

Source: American Society of Heating, Refrigerating and Air-Conditioning Engineers

2. U.S. Department of Energy: Air Infiltration and Building Envelope Leakage

The Department of Energy identifies building envelope gaps as a primary pathway for outdoor pollutants, including wildfire smoke, to enter residential living spaces. Homes built before 1980 carry higher infiltration risk from lower original air-sealing standards. Duct leakage in unconditioned attics and crawlspaces creates a secondary entry point that operates independently of doors and windows. Sealing the building envelope and the return duct system reduces PM2.5 infiltration, though it works alongside filter upgrades, not instead of them.

Source: U.S. Department of Energy

3. ENERGY STAR: Indoor Air Quality and Residential Filtration Standards

ENERGY STAR’s Indoor Air Package program establishes minimum filtration and duct sealing requirements for certified homes, with MERV 13 cited as the minimum filter rating for effective fine particle control in residential HVAC applications [VERIFY]. The program indicates that filter replacement intervals should shorten during sustained smoke exposure because filter media saturates faster under elevated PM2.5 loading. Homes certified under the Indoor Air Package standard must demonstrate specific duct sealing and filtration performance thresholds that directly limit smoke infiltration risk.

Source: ENERGY STAR (U.S. Environmental Protection Agency)

Final Thoughts

An AQI above 100 in New York demands a response, whether the source is a local fire or smoke transported hundreds of miles from a fire you will never see. In our field assessments across Central Florida, homes with the lowest indoor PM2.5 readings during smoke events shared two traits: a MERV 13 filter compatible with their system, and recirculation mode already running before the AQI peaked.

Check the map, confirm your AQI reading, and look at what filter is actually running in your system. If it is rated below MERV 11 and smoke is moving into your area, that is the variable worth addressing now.

Frequently Asked Questions

How do I know if wildfire smoke is affecting my indoor air quality?

The most reliable method is a low-cost PM2.5 indoor air quality monitor, which measures fine particle concentration in real time. If indoor readings climb while windows are closed, your building envelope or return duct system has infiltration pathways. An outdoor AQI above 100 is a reliable trigger to check indoor readings directly.

What MERV rating do I need to filter wildfire smoke effectively?

MERV 13 is the performance threshold the EPA references for effective residential smoke particle capture, based on its 85% or better efficiency in the 1 to 3 micron range where PM2.5 concentrates. A MERV 13 pleated HVAC filter 4-pack in a common residential size is available at Walmart for quick pickup before conditions worsen. MERV 11 provides meaningful improvement over MERV 8 for homes where system pressure concerns make MERV 13 incompatible. Confirm your system’s static pressure tolerance before upgrading.

Should I run my HVAC system during a wildfire smoke event?

Yes, with conditions. Run the system in recirculation mode so it is not drawing outdoor air through fresh-air intakes. Confirm your filter is rated MERV 11 or higher before running in smoke conditions. Having a MERV 8 pleated furnace filter in your standard size on hand as a fallback ensures you’re never caught running a spent filter. A system pulling outdoor air through a MERV 8 filter during an AQI 200 event will increase indoor PM2.5 concentration, not reduce it.

How long does wildfire smoke stay in a home after outdoor AQI returns to normal?

Fine particles that settled on surfaces, ductwork, and filter media can re-suspend for 24 to 48 hours after outdoor conditions improve. Replace your filter as soon as outdoor AQI drops below 100. A MERV 8 Dust Defense pleated HVAC filter 2-pack at Target gives you a ready replacement for the post-event swap. Run the system in recirculation for several hours post-event to flush residual particles through the filter before returning to normal operation.

Can a standard central HVAC filter protect against PM2.5 from wildfire smoke?

Only if rated MERV 11 or higher. Filters rated below MERV 11 allow PM2.5 particles to pass through with limited capture. A MERV 13 filter in a compatible system is the verified standard for residential smoke protection. No filter eliminates 100% of PM2.5 infiltration, but the performance gap between MERV 8 and MERV 13 during a sustained smoke event is measurable in real indoor air quality readings. A pleated MERV 8 AC filter replacement is available on eBay for comparison pricing across common residential sizes.

Ready to Know Where Your System Stands?

If you want a transparent assessment of your HVAC system’s filtration performance, including filter rating compatibility, static pressure verification, and duct sealing evaluation, reach out and we will walk you through it. The cost breakdown is upfront, the timeline is yours, and there are no hidden fees attached to the conversation.

Leave a Comment